Skip to Main Content
Search distributed energy resources in New York

PatterSun Solar 1.3

Overview PatterSun Solar 1.3

The project snapshot page provides a quick overview of the performance of the DER project. Hover over individual key performance indicators to see a definition.

Performance Snapshot

Feb 2017 to Apr 2022
9,017
MWh
electricity generated
Capacity
Factor

The project monthly summary table provides measured data and key performance indicators for the DER project.

To view data for another date range, select your desired months and press “Go”.

To download data from the monthly summary table in CSV format, press the download button to the top right of the table.

Automated data filtering can be enabled or disabled via the control. Filtered data automatically checks to determine if the energy streams measured are consistent with each other (e.g. fuel consumption or heat recovery are reported only when a DER is reporting generated power). Disabling this control shows all data available.

Summary Table

Feb 2017 to Apr 2022
Electricity Generated (kWh) Capacity Factor (%)
Total 9,016,612 14.4
Feb 2017
117,430 12.8
Mar 2017
160,693 15.8
Apr 2017
155,787 15.8
May 2017
166,754 16.4
Jun 2017
195,680 19.9
Jul 2017
192,993 18.9
Aug 2017
194,699 19.1
Sep 2017
172,772 17.5
Oct 2017
149,369 14.7
Nov 2017
113,137 11.5
Dec 2017
73,664 7.2
Jan 2018
100,017 9.8
Feb 2018
84,693 9.2
Mar 2018
150,675 14.8
Apr 2018
151,498 15.4
May 2018
162,626 16.0
Jun 2018
194,807 19.8
Jul 2018
208,299 20.5
Aug 2018
157,324 15.4
Sep 2018
119,444 12.1
Oct 2018
113,633 11.2
Nov 2018
89,347 9.1
Dec 2018
85,961 8.4
Jan 2019
95,638 9.4
Feb 2019
124,216 13.5
Mar 2019
171,843 16.9
Apr 2019
154,445 15.7
May 2019
162,933 16.0
Jun 2019
188,481 19.1
Jul 2019
196,534 19.3
Aug 2019
200,597 19.7
Sep 2019
169,980 17.2
Oct 2019
109,038 11.4
Nov 2019
86,936 8.8
Dec 2019
64,147 6.3
Jan 2020
73,825 7.2
Feb 2020
114,003 12.0
Mar 2020
155,344 15.3
Apr 2020
97,000 9.8
May 2020
177,092 17.4
Jun 2020
212,542 21.6
Jul 2020
200,091 19.6
Aug 2020
178,710 17.5
Sep 2020
174,600 17.7
Oct 2020
128,732 12.6
Nov 2020
95,366 9.7
Dec 2020
76,249 7.5
Jan 2021
93,416 9.2
Feb 2021
88,438 9.6
Mar 2021
188,442 18.5
Apr 2021
176,594 17.9
May 2021
195,352 19.2
Jun 2021
198,976 20.2
Jul 2021
170,201 16.7
Aug 2021
165,676 16.3
Sep 2021
164,183 16.7
Oct 2021
126,268 12.4
Nov 2021
121,580 12.3
Dec 2021
81,150 8.0
Jan 2022
105,486 10.4
Feb 2022
121,509 13.2
Mar 2022
151,398 14.9
Apr 2022
148,296 17.4

Production data is not in real time and may be delayed as data is periodically reported and uploaded to this website.

Data Displayed:

The monthly summary plot shows monthly sums of measured data and monthly averages of key performance indicators.

To view data for another date range, select your desired months and press “Go”.

To download data used to create the monthly summary plot in CSV format, press the download button to the top right of the chart.

Automated data filtering can be enabled or disabled via the control. Filtered data automatically checks to determine if the energy streams measured are consistent with each other (e.g. fuel consumption or heat recovery are reported only when a DER is reporting generated power). Disabling this control shows all data available.

Click on legend entries below the plot, if present, to show or hide data.

Data Displayed

Production data is not in real time and may be delayed as data is periodically reported and uploaded to this website.

Data Displayed:

The time series plot shows averages of measured data and key performance indicators. The plot can be switched between the daily and hourly time steps, to adjust the level of averaging displayed.

To view data for another date range or time step, select your desired dates and time step and press “Go”. Due to performance constraints, hourly data may only be displayed within a date range of up to one month in length.

To download data used to create the time series plot in CSV format, press the download button to the top right of the chart.

Automated data filtering can be enabled or disabled via the control. Filtered data automatically checks to determine if the energy streams measured are consistent with each other (e.g. fuel consumption or heat recovery are reported only when a DER is reporting generated power). Disabling this control shows all data available.

Click on legend entries below the plot, if present, to show or hide data.

Data Displayed

Times are shown in Eastern Time (ET) and are adjusted to reflect Daylight Saving Time (DST).

Production data is not in real time and may be delayed as data is periodically reported and uploaded to this website.

Data Displayed:

The ambient temperature plot shows averages of measured data and key performance indicators versus ambient temperature.

To view data for another date range or time step, select your desired dates and time step and press “Go”. Due to performance constraints, hourly data may only be displayed within a date range of up to one month in length.

To download data used to create the ambient temperature plot in CSV format, press the download button to the top right of the chart.

Automated data filtering can be enabled or disabled via the control. Filtered data automatically checks to determine if the energy streams measured are consistent with each other (e.g. fuel consumption or heat recovery are reported only when a DER is reporting generated power). Disabling this control shows all data available.

Click on legend entries below the plot, if present, to show or hide data.

Data Displayed
Ambient Temperature data provided by NOAA at weather.govLink opens in new window - close new window to return to this page.

Production data is not in real time and may be delayed as data is periodically reported and uploaded to this website.

The project performance benchmark page shows how the DER project performs compared to similar-sized projects using the same technology in the same facility category. The key performance index used for benchmarking can be changed by selecting the desired rating from the table headings at the bottom of the page. Clicking on each result in the distribution will bring up the name and link to other related facilities.

To view data for another date range, select your desired months and press “Go”.

Note that benchmarking only occurs on data with automated data filtering on, to ensure consistent ranking results.

Capacity
Factor
Electric
Generation
PatterSun Solar 1.3 14.4 % 9,017 MWh
Top Peer 12.2 % 13,942 MWh
Average Peer 11.6 % 6,730 MWh

Peer Criteria

  • Technology: Solar PV
  • Generation Capacity: Large (1000+ kW)
  • Facility Category: Utilities Water and Waste Management
  • Total Peers in Group: 23

Use this page to download all measured performance data for a DER project in CSV format. Select your desired date range and time step, then press the “Download” button to save the data file to your computer.

Download Data

To download performance data, select your desired date range and time step, then click the Download button.

Production data is not in real time and may be delayed as data is periodically reported and uploaded to this website.